GLASS
We can offer you processed glass structures from mini to jumbo sizes, using materials only from leading European glass suppliers: Saint Gobain, Guardian, AGC.
TYPES OF GLASS
TRANSPARENT GLASS
Transparent glass with a high degree of light transmission. The edge has a greenish tint.
MATTE GLASS
Glass with a low degree of transparency.
High light transmission.
ULTRA-TRANSPARENT GLASS
Glass with a higher degree of transparency.
The edge has a blue tint.
SMART GLASS
Glass with electrically controlled transparency.
Produced on the basis of a special film by the triplexing method.
TINTED GLASS
Less transparent fused glass with the addition of metal oxides to the glass mass. Main colors: bronze, grey, blue and their tints
GLASS PROCESSING
TEMPERED AND CURVED GLASS
Tempered high-strength glass with a paint (enamel) coating applied to one of the surfaces, subjected to heat treatment.
ENAMALITE
Tempered high-strength glass with a paint (enamel) coating applied to one of the surfaces, subjected to heat treatment.
LAMINATION GLASS
Large-format glass equipment for the production of triplex 4000*2400mm.
MILLING HOLES, COTUUTS, GROOVES
Large-format glass tempering furnace. Technological holes of complex shapes, figured and artistic cotouts.
SAND BLASTING
Blasting glass/mirror with an air and sand jet to create a matte surface.
HIGH-PRECISION DRILLING OF HOLES
With precise positioning of the hole position on the glass and precise adherence to the technical specification.
GLASS EDGE PROCESSING
On rectangular and with different angles of glass sheets.
Edge types: standard (flat edge with chamfers), round or 45-degree angle.
Types of edging: dulling or chamfering, euro polishing, euro grinding.
TECHNICAL CAPABILITIES for glass processing
GLASS EDGE AND SURFACE PROCESSING
| TYPE OF PROCESSING | Glass thicknes, mm |
Min workpiece size, mm |
Max workpiece size, mm |
|---|---|---|---|
| Edge processing: blunting, Euro grinding, Euro polishing (standard edge and 45 edge) | 4-8 | 130 x 200 | 3030 x 6000 |
| 4-8 | 130 x 200 | 3030 x 6000 | |
| Round edge processing | 4-12 | 300 x 450 | 1400 x 2700 |
| Edge processing on non-rectangular products | 4-12 | 300 x 450 | 2000 x 4000 |
| High-precision drilling of holes* | 4-12 | 160 x 300 | 3000 x 6000 |
| Scanning with a template | 4-12 | 200 x 300 | 1500 x 2400 |
GLASS REINFORCEMENT, TEMPERING AND BENDING
| Tempering | 4-12 | 100 x 350 | 3030 x 6000 |
| Tempering of round workpieces | 4-12 | Ø 400 | Ø 200 |
| Bending, scan size | 4-12 | 350 x 500 | 2440 x 1800 |
| Bending, arc length | 4-12 | 500 | 1800 |
| Bending, bending radius | 4-6 | 900 | 15000 |
| 8-10 | 130 x 200 | 15000 | |
| 12 | 1200 | 15000 | |
| Triplexing | 4-12 | 100 x 100 | 2400 x 4000 |
| Artifical glass ageing (HEAT SOAK TEST) | 4-12 | without limitation | 3030 x 6000 |
GLASS EDGE AND SURFACE PROCESSING
| TYPE OF PROCESSING | Glass thicknes, mm |
Min workpiece size, mm |
Max workpiece size, mm |
|
|---|---|---|---|---|
| Glass enameling (ceramic paint is baked at the same time as the glass tempering) | 6 | 100 x 300 | 2000 x 4200 | |
| 8-12 | 100 x 300 | 2000 x 3000 | ||
| Artistic matting (sandblasting continuous and patterned) |
Tempered glass | 4-12 | 200 x 200 | L 2650 x H 2000** |
| Crude glass | 6-12 | 200 x 200 | L 2650 x H 2000** | |
HEAT SOAK TEST
Artificial aging of glass.
Purpose: to reduce the risk of spontaneous fracture of temperedglass during it’s operation.
